Safety data sheet for Copper sulfate
CAS 7758-98-7
This is the free preview of a draft SDS for Copper sulfate — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Root killer, fungicide, laboratory reagent.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 7758-98-7
- Molecular formula
- CuO4S
- Molecular weight
- 159.61 g/mol
- Signal word
- Danger
Hazard classification
- GHS05 — Corrosive
- GHS07 — Health hazard — irritant
- GHS09 — Hazardous to the environment
- H302: Harmful if swallowed.
- H318: Causes serious eye damage.
- H400: Very toxic to aquatic life.
- H410: Very toxic to aquatic life with long lasting effects.
Section 1 — Identification
1.1 Product identifier
Product identifier: Copper Sulfate
Chemical name (IUPAC): copper sulfate
CAS number: 7758-98-7
EC number: 231-847-6
REACH registration number: Not required for substances manufactured/imported <1 tonne/year; otherwise confirm the active registrant number before external issue.
IUPAC name: copper sulfate
PubChem CID reference: 24462
Synonyms: Copper sulfate; Copper(II) sulfate; CUPRIC SULFATE; Cupric sulfate anhydrous; Copper sulphate; Copper(2+) sulfate; Copper monosulfate; Copper(ii) sulfate, anhydrous; Hylinec; Trinagle
1.2 Relevant identified uses of the substance or mixture and uses advised against
Relevant identified uses: Laboratory reagent, industrial processing aid, formulation component, and internal product-stewardship review subject to supplier confirmation.
Uses advised against: Consumer, medical, food, or any other use not covered by the supplier's label, technical instructions, or exposure scenario.
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification according to harmonized EU CLP data: Acute Tox. 4 (Oral); Eye Dam. 1; Aquatic Acute 1; Aquatic Chronic 1.
2.2 Label elements
Signal word: Danger
GHS pictograms: GHS05 (Corrosion), GHS07 (Exclamation), GHS09 (Environmental Hazard)
Hazard statement: H302: Harmful if swallowed.
Hazard statement: H318: Causes serious eye damage.
Hazard statement: H400: Very toxic to aquatic life.
Hazard statement: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statement: P264+P265: Wash hands thoroughly after handling. Do not touch eyes.
Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection, face protection, and hearing protection.
Precautionary statement: P273: Avoid release to the environment.
Precautionary statement: P305+P354+P338: IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
Precautionary statement: P302+P352: IF ON SKIN: Wash with plenty of water.
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Solid
Appearance: Grayish-white to greenish-white rhombic crystals or amorphous powder /SRP: somewhat wet/
Odor: Pleasant odor
Boiling point: 650°C (1202°F)
Melting point: 590°C (1094°F)
Flash point: Not available
Density: 3.6 @25 °C
Vapor pressure: Not available
Water solubility: Solubility in water, g/l at 20 °C: 203 (freely soluble)
Log Pow (log Kow): Not available
Vapor density: Not available
Lower explosive limit: Not available
Upper explosive limit: Not available
Auto-ignition temperature: Not available
Viscosity: Not available
pH: Not available
9.2 Other information
Other information: Additional classification-supporting physical hazard data should be confirmed from the customer-specific product specification where required.
Sources
- ECHA C&L Inventory — harmonised CLP entry
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
- PubChem — transport information
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Copper sulfate, and where each one comes from
10 measured values for 6 properties, read from 2 public databases. On 1 property the records differ. Each reading is shown with its own record. Follow any record to read the value at its source.
Boiling point
1 record
Used with vapour pressure to judge how readily the substance reaches the air you breathe.
- 650 °C (decomp to cupric oxide)
- Hazardous Substances Data Bank (HSDB)
Melting point
1 record
Fixes the physical state at handling temperature, which the label and the transport class depend on.
- 590 °C decomp
- Hazardous Substances Data Bank (HSDB)
Density
2 records differ
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
Solubility
3 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- In water, 243 g/l @ 0 °C
- Hazardous Substances Data Bank (HSDB)
- 75.4 g/100 cc water @ 100 °C
- Hazardous Substances Data Bank (HSDB)
- 1.04 g/100 cc methanol @ 18 °C
- Hazardous Substances Data Bank (HSDB)
Odour
1 record
Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.
- Pleasant odor
- Hazardous Substances Data Bank (HSDB)
Decomposition temperature
2 records, each a different case
The temperature at which the substance breaks down, often into products more hazardous than itself.
- 650 °C (decomp to cupric oxide)
- Hazardous Substances Data Bank (HSDB)
- SLIGHT DECOMP ABOVE 200 °C
- Hazardous Substances Data Bank (HSDB)
These are the public records read for Copper sulfate, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Copper sulfate
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable .docx and a PDF with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.