Safety data sheet for Methanol

CAS 67-56-1

This is the free preview of a draft SDS for Methanol — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Fuel additive, industrial solvent, lab reagent.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
67-56-1
Molecular formula
CH4O
Molecular weight
32.042 g/mol
Signal word
Danger

Hazard classification

  • GHS02 — Flammable
  • GHS06 — Acute toxicity
  • GHS08 — Serious health hazard
  • H225: Highly Flammable liquid and vapor.
  • H301: Toxic if swallowed.
  • H311: Toxic in contact with skin.
  • H331: Toxic if inhaled.
  • H370: Causes damage to organs.

Section 1 — Identification

1.1 Product identifier

Product identifier: Methanol

Chemical name (IUPAC): methanol

CAS number: 67-56-1

PubChem CID reference: 887

Synonyms: methanol; methyl alcohol; wood alcohol; Methylol; Wood naphtha; Methyl hydroxide; Monohydroxymethane; Methylalkohol; Alcool methylique; Methyl hydrate

1.2 Relevant identified uses of the substance or mixture and uses advised against

Relevant identified uses: Laboratory reagent, industrial processing aid, formulation component, and internal product-stewardship review subject to supplier confirmation.

Uses advised against: Consumer, medical, food, or any other use not covered by the supplier's label, technical instructions, or exposure scenario.

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes.

Classification: Flammable Liquid, Category 2 (Flam. Liq. 2) [H225]

Classification: Acute Toxicity, Category 3 — Oral (Acute Tox. 3 (Oral)) [H301]

Classification: Acute Toxicity, Category 3 — Dermal (Acute Tox. 3 (Dermal)) [H311]

Classification: Acute Toxicity, Category 3 — Inhalation (Acute Tox. 3 (Inhalation)) [H331]

Classification: Specific Target Organ Toxicity, Single Exposure, Category 1 (STOT SE 1) [H370]

2.2 Label elements

Signal word: Danger

GHS pictograms: GHS02 (Flammable), GHS06 (Toxic), GHS08 (Health Hazard)

Hazard statement: H225: Highly Flammable liquid and vapor.

Hazard statement: H301: Toxic if swallowed.

Hazard statement: H311: Toxic in contact with skin.

Hazard statement: H331: Toxic if inhaled.

Hazard statement: H370: Causes damage to organs.

Precautionary statement: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Precautionary statement: P260: Do not breathe dust/fume/gas/mist/vapors/spray.

Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection, face protection, and hearing protection.

Precautionary statement: P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.

Precautionary statement: P301+P316: IF SWALLOWED: Get emergency medical help immediately.

Precautionary statement: P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Liquid

Appearance: Colorless liquid

Odor: Slight alcoholic odor when pure; repulsive, pungent odor when crude

Boiling point: 64.7°C

Melting point: -97.8°C (-144°F)

Flash point: 11°C

Density: 0.791 g/cm³ at 20°C

Vapor pressure: 127 mmHg at 20°C

Water solubility: Miscible

Log Pow (log Kow): -0.77

Vapor density: 1.11 (air = 1)

Lower explosive limit: 6%

Upper explosive limit: 36.5%

Auto-ignition temperature: 464°C (867°F)

Viscosity: 0.544 mPa.s at 25 °C

pH: Not available

9.2 Other information

Other information: Additional classification-supporting physical hazard data should be confirmed from the customer-specific product specification where required.

Sources

  • ECHA C&L Inventory — harmonised CLP entry
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data
  • PubChem — transport information

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Methanol, and where each one comes from

36 measured values for 12 properties, read from 4 public databases. On 5 properties the records differ. Each reading is shown with its own record. Follow any record to read the value at its source.

Boiling point

4 records, 64 to 65 °C

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

Melting point

4 records agree

Fixes the physical state at handling temperature, which the label and the transport class depend on.

Flash point

5 records, 10 to 16 °C

The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.

9.7 °C (49.5 °F) - closed cup
Hazardous Substances Data Bank (HSDB)
15.6 °C (open cup) /from table/
Hazardous Substances Data Bank (HSDB)
52 °F (11 °C) (closed cup)
Hazardous Substances Data Bank (HSDB)

Auto-ignition temperature

1 record

The temperature at which the substance ignites with no spark or flame. It sets safe surface and process temperatures.

Explosive limits

1 record

The vapour concentration range in air that will burn. Below the lower limit and above the upper limit it will not.

Lower explosive limit 6.0%; Upper explosive limit 36.5 %
Hazardous Substances Data Bank (HSDB)

Vapour pressure

6 records differ

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

Vapour density

2 records differ

Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.

Density

4 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

0.8100 at 0 °C/4 °C; 0.7866 at 25 °C/4 °C
Hazardous Substances Data Bank (HSDB)

Solubility

5 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

Miscible with water at 25 °C
Hazardous Substances Data Bank (HSDB)
Miscible with water at 20 °C
Hazardous Substances Data Bank (HSDB)
Miscible with ethanol, ether, benzene, most organic solvents and ketones
Hazardous Substances Data Bank (HSDB)
Soluble in acetone, chloroform
Hazardous Substances Data Bank (HSDB)

Partition coefficient (log Kow)

1 record

Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.

Viscosity

1 record

Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.

Odour

2 records, each a different case

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

Slight alcoholic odor when pure; repulsive, pungent odor when crude
Hazardous Substances Data Bank (HSDB)
Characteristic pungent odor
Hazardous Substances Data Bank (HSDB)

These are the public records read for Methanol, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Methanol

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable .docx and a PDF with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or a novel compound stops before checkout and routes to the free mixture classifier or R&D SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.