Safety data sheet for Nitric acid

CAS 7697-37-2

This is the free preview of a draft SDS for Nitric acid — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Metal finishing, laboratory reagent.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
7697-37-2
Molecular formula
HNO3
Molecular weight
63.013 g/mol
Signal word
Danger

Hazard classification

  • GHS03 — Oxidising
  • GHS05 — Corrosive
  • GHS06 — Acute toxicity
  • H290: May be corrosive to metals.
  • H272: May intensify fire; oxidizer.
  • H331: Toxic if inhaled.
  • H314: Causes severe skin burns and eye damage.

Section 1 — Identification

1.1 Product identifier

Product identifier: Nitric Acid

Chemical name (IUPAC): nitric acid

CAS number: 7697-37-2

EC number: 231-714-2

REACH registration number: Not required for substances manufactured/imported <1 tonne/year; otherwise confirm the active registrant number before external issue.

IUPAC name: nitric acid

PubChem CID reference: 944

Synonyms: NITRIC ACID; Azotic acid; Aqua fortis; Salpetersaeure; Nital; HNO3; Acide nitrique; Acidum nitricum; Nitricum acidum; Nitrous fumes

1.2 Relevant identified uses of the substance or mixture and uses advised against

Relevant identified uses: Laboratory reagent, industrial processing aid, formulation component, and internal product-stewardship review subject to supplier confirmation.

Uses advised against: Consumer, medical, food, or any other use not covered by the supplier's label, technical instructions, or exposure scenario.

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification according to harmonized EU CLP data: Ox. Liq. 3; Acute Tox. 3 (Inhalation); Skin Corr. 1A; Eye Dam. 1.

2.2 Label elements

Signal word: Danger

GHS pictograms: GHS03 (Oxidizing), GHS05 (Corrosion), GHS06 (Toxic)

Hazard statement: H290: May be corrosive to metals.

Hazard statement: H272: May intensify fire; oxidizer.

Hazard statement: H331: Toxic if inhaled.

Hazard statement: H314: Causes severe skin burns and eye damage.

Precautionary statement: P234: Keep only in original packaging.

Precautionary statement: P390: Absorb spillage to prevent material damage.

Precautionary statement: P260: Do not breathe dust/fume/gas/mist/vapors/spray.

Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection, face protection, and hearing protection.

Precautionary statement: P264: Wash hands thoroughly after handling.

Precautionary statement: P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.

Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

Precautionary statement: P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Liquid

Appearance: Transparent, colorless, or yellowish, fuming, hygroscopic, corrosive liquid

Odor: Characteristic choking odor

Boiling point: 82.8°C (181°F) at 1013 hPa

Melting point: -41.6°C (-43°F)

Flash point: Not available

Density: 1.5129 g/cm³ at 20°C

Vapor pressure: 84.1 hPa at 25°C

Water solubility: Miscible

Log Pow (log Kow): -0.21

Vapor density: 1 (air = 1)

Lower explosive limit: Not available

Upper explosive limit: Not available

Auto-ignition temperature: Not available

Viscosity: 1.092 mPa.s at 0 °C; 0.746 mPa.s at 25 °C; 0.617 mPa.s at 40 °C

pH: Not available

9.2 Other information

Other information: Additional classification-supporting physical hazard data should be confirmed from the customer-specific product specification where required.

Sources

  • ECHA C&L Inventory — harmonised CLP entry
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data
  • PubChem — transport information

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Nitric acid, and where each one comes from

23 measured values for 7 properties, read from 4 public databases. On 2 properties the records differ. Each reading is shown with its own record. Follow any record to read the value at its source.

Boiling point

4 records agree

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

Melting point

4 records agree

Fixes the physical state at handling temperature, which the label and the transport class depend on.

Vapour pressure

4 records differ

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

Density

4 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

(77 °F): 1.50
NIOSH Pocket Guide

Solubility

3 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

Viscosity

1 record

Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.

1.092 mPa.s at 0 °C; 0.746 mPa.s at 25 °C; 0.617 mPa.s at 40 °C
Hazardous Substances Data Bank (HSDB)

Odour

3 records, each a different case

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

Characteristic choking odor
Hazardous Substances Data Bank (HSDB)

These are the public records read for Nitric acid, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Nitric acid

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable .docx and a PDF with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or a novel compound stops before checkout and routes to the free mixture classifier or R&D SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.