Safety data sheet for Zinc chloride
CAS 7646-85-7
This is the free preview of a draft SDS for Zinc chloride — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Soldering flux, wood preservative.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 7646-85-7
- Molecular formula
- Cl2Zn
- Molecular weight
- 136.3 g/mol
- Signal word
- Danger
Hazard classification
- GHS05 — Corrosive
- GHS07 — Health hazard — irritant
- GHS09 — Hazardous to the environment
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H400: Very toxic to aquatic life.
- H410: Very toxic to aquatic life with long lasting effects.
Section 1 — Identification
1.1 Product identifier
Product identifier: Zinc Chloride
Chemical name (IUPAC): dichlorozinc
CAS number: 7646-85-7
EC number: 231-592-0
REACH registration number: Not required for substances manufactured/imported <1 tonne/year; otherwise confirm the active registrant number before external issue.
IUPAC name: dichlorozinc
PubChem CID reference: 5727
Synonyms: Dichlorozinc; Zinkchloride; Zintrace; Zinc chloride fume; Zinc chloride (ZnCl2); Zinkchlorid; Zine dichloride; Chlorure de zinc; Zinc (chlorure de); Zinco (cloruro di)
1.2 Relevant identified uses of the substance or mixture and uses advised against
Relevant identified uses: Laboratory reagent, industrial processing aid, formulation component, and internal product-stewardship review subject to supplier confirmation.
Uses advised against: Consumer, medical, food, or any other use not covered by the supplier's label, technical instructions, or exposure scenario.
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification according to harmonized EU CLP data: Acute Tox. 4 (Oral); Skin Corr. 1B; Eye Dam. 1; Aquatic Acute 1; Aquatic Chronic 1.
2.2 Label elements
Signal word: Danger
GHS pictograms: GHS05 (Corrosion), GHS07 (Exclamation), GHS09 (Environmental Hazard)
Hazard statement: H302: Harmful if swallowed.
Hazard statement: H314: Causes severe skin burns and eye damage.
Hazard statement: H400: Very toxic to aquatic life.
Hazard statement: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statement: P260: Do not breathe dust/fume/gas/mist/vapors/spray.
Precautionary statement: P264+P265: Wash hands thoroughly after handling. Do not touch eyes.
Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection, face protection, and hearing protection.
Precautionary statement: P305+P354+P338: IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
Precautionary statement: P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Precautionary statement: P302+P361+P354: IF ON SKIN: Take off Immediately all contaminated clothing. Immediately rinse with water for several minutes.
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Solid
Appearance: White, very deliquesce granules, or fused pieces or rods
Odor: Odorless
Boiling point: 732.2°C (1350°F) at 1013 hPa
Melting point: 290°C (554°F)
Flash point: Not available
Density: 2.907 at 25 °C
Vapor pressure: 0 hPa at 305°C
Water solubility: Solubility in water, g/100ml at 25 °C: 432 (very good)
Log Pow (log Kow): Not available
Vapor density: Not available
Lower explosive limit: Not available
Upper explosive limit: Not available
Auto-ignition temperature: Not available
Viscosity: Not available
pH: Not available
9.2 Other information
Other information: Additional classification-supporting physical hazard data should be confirmed from the customer-specific product specification where required.
Sources
- ECHA C&L Inventory — harmonised CLP entry
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
- PubChem — transport information
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Zinc chloride, and where each one comes from
23 measured values for 7 properties, read from 4 public databases. On 2 properties the records differ. Each reading is shown with its own record. Follow any record to read the value at its source.
Boiling point
4 records agree
Used with vapour pressure to judge how readily the substance reaches the air you breathe.
- 1350 °F
- NIOSH Pocket Guide
- 732 °C @760 [mm Hg]
- PAC Chemical Database, U.S. Department of Energy
Melting point
4 records agree
Fixes the physical state at handling temperature, which the label and the transport class depend on.
- Approximately 290 °C
- Hazardous Substances Data Bank (HSDB)
- 554 °F
- NIOSH Pocket Guide
Vapour pressure
3 records differ
The higher it is, the faster the substance evaporates into the workplace air at room temperature.
- 0 mmHg (approx)
- NIOSH Pocket Guide
- 0 mmHg (approx)
- OSHA Occupational Chemical Database
- 1 [mm Hg] @428 °C
- PAC Chemical Database, U.S. Department of Energy
Density
4 records differ
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
- 2.907 at 25 °C
- Hazardous Substances Data Bank (HSDB)
- (77 °F): 2.91
- NIOSH Pocket Guide
- 2.91 at 77 °F
- OSHA Occupational Chemical Database
Solubility
5 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- 432 g/100 g water at 25 °C; 614 g/100 g water at 100 °C
- Hazardous Substances Data Bank (HSDB)
- 1 gram dissolves in 0.25 mL 2% hydrochloric acid, 1.3 mL alcohol, 2 mL glycerol; freely soluble in acetone
- Hazardous Substances Data Bank (HSDB)
- 100 g/100 cc alcohol at 12.5 °C
- Hazardous Substances Data Bank (HSDB)
- 434.599 lb/100 lb water at 70 °F
- Hazardous Substances Data Bank (HSDB)
- (70 °F): 435%
- NIOSH Pocket Guide
pH
1 record
Drives the skin and eye corrosion classification for solutions, alongside the corrosivity data.
- Aqueous solutions of zinc chloride are acidic (pH = 1.0 for 6 M)
- Hazardous Substances Data Bank (HSDB)
Odour
2 records, each a different case
Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.
- FUME HAS AN ACRID ODOR /ZINC CHLORIDE FUMES/
- Hazardous Substances Data Bank (HSDB)
These are the public records read for Zinc chloride, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Zinc chloride
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable .docx and a PDF with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.